opam-clean

Section: Opam Manual (1)
Updated:
Index Return to Main Contents
 

NAME

opam-clean - Cleans up opam caches  

SYNOPSIS

opam clean [OPTION]...  

DESCRIPTION

Cleans up opam caches, reclaiming some disk space. If no options are specified, the default is --logs --download-cache --switch-cleanup.  

OPTIONS

-a, --all-switches
Run the switch cleanup commands in all switches. Implies --switch-cleanup
-c, --download-cache
Clear the cache of downloaded files ($OPAMROOT/download-cache), as well as the obsolete $OPAMROOT/archives, if that exists.
--dry-run
Print the removal commands, but don't execute them
--logs
Clear the logs directory.
-r, --repo-cache
Clear the repository cache. It will be rebuilt by the next opam command that needs it.
-s, --switch-cleanup
Run the switch-specific cleanup: clears backups, build dirs, uncompressed package sources of non-dev packages, local metadata of previously pinned packages, etc.
--unused-repositories
Clear any configured repository that is not used by any switch nor the default.
 

COMMON OPTIONS

These options are common to all commands.

--best-effort
Don't fail if all requested packages can't be installed: try to install as many as possible. Note that not all external solvers may support this option (recent versions of aspcud or mccs should).
--color=WHEN
Colorize the output. WHEN must be one of `always', `never' or `auto'.
--criteria=CRITERIA
Specify user preferences for dependency solving for this run. Overrides both $OPAMCRITERIA and $OPAMUPGRADECRITERIA. For details on the supported language, and the external solvers available, see http://opam.ocaml.org/doc/Specifying_Solver_Preferences.html. A general guide to using solver preferences can be found at http://www.dicosmo.org/Articles/usercriteria.pdf.
--cudf=FILENAME
Debug option: Save the CUDF requests sent to the solver to FILENAME-<n>.cudf.
--debug
Print debug message to stderr. This is equivalent to setting $OPAMDEBUG to "true".
--debug-level=LEVEL
Like --debug, but allows specifying the debug level (--debug sets it to 1). Equivalent to setting $OPAMDEBUG to a positive integer.
--git-version
Print the git version of opam, if set (i.e. you are using a development version), and exit.
--help[=FMT] (default=auto)
Show this help in format FMT. The value FMT must be one of `auto', `pager', `groff' or `plain'. With `auto', the format is `pager` or `plain' whenever the TERM env var is `dumb' or undefined.
--ignore-pin-depends
Ignore extra pins required by packages that get pinned, either manually through opam pin or through opam install DIR. This is equivalent to setting IGNOREPINDEPENDS=true.
--json=FILENAME
Save the results of the opam run in a computer-readable file. If the filename contains the character `%', it will be replaced by an index that doesn't overwrite an existing file. Similar to setting the $OPAMJSON variable.
--no-auto-upgrade
When configuring or updating a repository that is written for an earlier opam version (1.2), opam internally converts it to the current format. This disables this behaviour. Note that repositories should define their format version in a 'repo' file at their root, or they will be assumed to be in the older format. It is, in any case, preferable to upgrade the repositories manually using opam admin upgrade [--mirror URL] when possible.
--no-self-upgrade
Opam will replace itself with a newer binary found at OPAMROOT/opam if present. This disables this behaviour.
-q, --quiet
Disables --verbose.
--root=ROOT
Use ROOT as the current root path. This is equivalent to setting $OPAMROOT to ROOT.
--safe, --readonly
Make sure nothing will be automatically updated or rewritten. Useful for calling from completion scripts, for example. Will fail whenever such an operation is needed ; also avoids waiting for locks, skips interactive questions and overrides the $OPAMDEBUG variable.
--solver=CMD
Specify the CUDF solver to use for resolving package installation problems. This is either a predefined solver (this version of opam supports builtin-mccs+lp(), builtin-mccs+glpk, aspcud, mccs, aspcud-old, packup), or a custom command that should contain the variables %{input}%, %{output}%, %{criteria}%, and optionally %{timeout}%.
--strict
Fail whenever an error is found in a package definition or a configuration file. The default is to continue silently if possible.
--switch=SWITCH
Use SWITCH as the current compiler switch. This is equivalent to setting $OPAMSWITCH to SWITCH.
--use-internal-solver, --no-aspcud
Disable any external solver, and use the built-in one (this requires that opam has been compiled with a built-in solver).
-v, --verbose
Be more verbose. One -v shows all package commands, repeat to also display commands called internally (e.g. tar, curl, patch etc.) Repeating n times is equivalent to setting $OPAMVERBOSE to "n".
--version
Show version information.
-w, --working-dir
Whenever updating packages that are bound to a local, version-controlled directory, update to the current working state of their source instead of the last committed state, or the ref they are pointing to. This only affects packages explicitly listed on the command-line.
-y, --yes
Answer yes to all yes/no questions without prompting. This is equivalent to setting $OPAMYES to "true".
 

ENVIRONMENT VARIABLES

Opam makes use of the environment variables listed here. Boolean variables should be set to "0", "no", "false" or the empty string to disable, "1", "yes" or "true" to enable.

OPAMCOLOR, when set to always or never, sets a default value for the --color option.

OPAMCRITERIA specifies user preferences for dependency solving. The default value depends on the solver version, use `config report` to know the current setting. See also option --criteria

OPAMCURL can be used to select a given 'curl' program. See OPAMFETCH for more options.

OPAMDEBUG see options `--debug' and `--debug-level'.

OPAMDOWNLOADJOBS sets the maximum number of simultaneous downloads.

OPAMERRLOGLEN sets the number of log lines printed when a sub-process fails. 0 to print all.

OPAMEXTERNALSOLVER see option `--solver'.

OPAMFETCH specifies how to download files: either `wget', `curl' or a custom command where variables %{url}%, %{out}%, %{retry}%, %{compress}% and %{checksum}% will be replaced. Overrides the 'download-command' value from the main config file.

OPAMJOBS sets the maximum number of parallel workers to run.

OPAMJSON log json output to the given file (use character `%' to index the files)

OPAMLOCK see option `--lock'.

OPAMNOAUTOUPGRADE disables automatic internal upgrade of repositories in an earlier format to the current one, on 'update' or 'init'.

OPAMKEEPLOGS tells opam to not remove some temporary command logs and some backups. This skips some finalisers and may also help to get more reliable backtraces

OPAMLOCKRETRIES sets the number of tries after which OPAM gives up acquiring its lock and fails. <= 0 means infinite wait.

OPAMNO answer no to any question asked.

OPAMNOASPCUD see option `--no-aspcud'.

OPAMNOSELFUPGRADE see option `--no-self-upgrade'.

OPAMPINKINDAUTO sets whether version control systems should be detected when pinning to a local path. Enabled by default since 1.3.0.

OPAMREQUIRECHECKSUMS Enables option `--require-checksums' when available (e.g. for `opam install`).

OPAMRETRY sets the number of tries before failing downloads.

OPAMROOT see option `--root'. This is automatically set by `opam env --root=DIR --set-root'.

OPAMROOTISOK don't complain when running as root.

OPAMSAFE see option `--safe'

OPAMSKIPVERSIONCHECKS bypasses some version checks. Unsafe, for compatibility testing only.

OPAMSOLVERTIMEOUT change the time allowance of the solver. Default is 60.0, set to 0 for unlimited. Note that all solvers may not support this option.

OPAMSTATUSLINE display a dynamic status line showing what's currently going on on the terminal. (one of one of `always', `never' or `auto')

OPAMSWITCH see option `--switch'. Automatically set by `opam env --switch=SWITCH --set-switch'.

OPAMUPGRADECRITERIA specifies user preferences for dependency solving when performing an upgrade. Overrides OPAMCRITERIA in upgrades if both are set. See also option --criteria

OPAMUSEINTERNALSOLVER see option `--use-internal-solver'.

OPAMUTF8 use UTF8 characters in output (one of one of `always', `never' or `auto'). By default `auto', which is determined from the locale).

OPAMUTF8MSGS use extended UTF8 characters (camels) in opam messages. Implies OPAMUTF8. This is set by default on OSX only.

OPAMVAR_var overrides the contents of the variable var when substituting `%{var}%` strings in `opam` files.

OPAMVAR_package_var overrides the contents of the variable package:var when substituting `%{package:var}%` strings in `opam` files.

OPAMVERBOSE see option `--verbose'.

OPAMYES see option `--yes'.  

EXIT STATUS

As an exception to the following, the `exec' command returns 127 if the command was not found or couldn't be executed, and the command's exit value otherwise.

0
Success, or true for boolean queries.
1
False. Returned when a boolean return value is expected, e.g. when running with --check, or for queries like opam lint.
2
Bad command-line arguments, or command-line arguments pointing to an invalid context (e.g. file not following the expected format).
5
Not found. You requested something (package, version, repository, etc.) that couldn't be found.
10
Aborted. The operation required confirmation, which wasn't given.
15
Could not acquire the locks required for the operation.
20
There is no solution to the user request. This can be caused by asking to install two incompatible packages, for example.
30
Error in package definition, or other metadata files. Using --strict raises this error more often.
31
Package script error. Some package operations were unsuccessful. This may be an error in the packages or an incompatibility with your system. This can be a partial error.
40
Sync error. Could not fetch some remotes from the network. This can be a partial error.
50
Configuration error. Opam or system configuration doesn't allow operation, and needs fixing.
60
Solver failure. The solver failed to return a sound answer. It can be due to a broken external solver, or an error in solver configuration.
99
Internal error. Something went wrong, likely due to a bug in opam itself.
130
User interrupt. SIGINT was received, generally due to the user pressing Ctrl-C.
 

FURTHER DOCUMENTATION

See https://opam.ocaml.org/doc.  

AUTHORS

Vincent Bernardoff <vb@luminar.eu.org>

Raja Boujbel <raja.boujbel@ocamlpro.com>

Roberto Di Cosmo <roberto@dicosmo.org>

Thomas Gazagnaire <thomas@gazagnaire.org>

Louis Gesbert <louis.gesbert@ocamlpro.com>

Fabrice Le Fessant <Fabrice.Le_fessant@inria.fr>

Anil Madhavapeddy <anil@recoil.org>

Guillem Rieu <guillem.rieu@ocamlpro.com>

Ralf Treinen <ralf.treinen@pps.jussieu.fr>

Frederic Tuong <tuong@users.gforge.inria.fr>  

BUGS

Check bug reports at https://github.com/ocaml/opam/issues.


 

Index

NAME
SYNOPSIS
DESCRIPTION
OPTIONS
COMMON OPTIONS
ENVIRONMENT VARIABLES
EXIT STATUS
FURTHER DOCUMENTATION
AUTHORS
BUGS

This document was created by man2html, using the manual pages.
Time: 01:01:17 GMT, October 20, 2018